This product is applied in the photovoltaic system, the service voltage can reach 1500VDC;This product is mainly used in photovoltaic DC combiner box and photovoltaic inverter. One CLBDF-32LM1500V fuse holder can be installed with four CLBDF-32PV1500
This product is applied in the photovoltaic system, the service voltage can reach 1500VDC;This product is mainly used in photovoltaic DC combiner box and photovoltaic inverter. One CLBDF-32LM1500V fuse holder can be installed with four CLBDF-32PV1500VDC fuses.
The product is easy to install, and its wiring and operation are outside the box;All wiring operations are in the same direction, which improves the utilization rate of tools, reduces the space occupied by products by one third, and facilitates the replacement and maintenance of products (similar products are connected and operated in the box, occupying a large space, and it is inconvenient to install and replace the fuse core), and reduces the cost of original similar products by more than 20%.
The holder of the fuse is small and modular.This product can be used in pv systems with rated voltage less than 1500V and rated current of single circuit below 32A, and the external protection grade of installation box is above IP66.
In use of the wiring, it is no DC polarity requirements,the power pole and load pole can be arbitrarily selected according to their own requirements.
|Rated insulation voltage||Ui||V||1500|
|Rated short circuit capacity||Icm||KA||33|
|Rated working time||H/day||8|
|Product connection capability||mm2||6|
|M10 tightening torque||Nm||2.5|
|Panel install nut tightening torque||Nm||2~2|
|Installation method||Panel Type|
|Storage and transportation temperature||℃||Between -25℃ and +55℃ and ,for short periods not exceeding 24h ,up to +70℃.|
|Height above sea level||m||≤2000|
|IP for single-hole panel mounting seals cover||IP65|
|Rated duty||Uninterrupted duty|